1400 kw 2 ton Horizontal LPG Fired Thermal Oil Boiler

1400 kw 2 ton Horizontal LPG Fired Thermal Oil Boiler
Product Thermal Capacity: 700-14000 KW
Working Pressure:0.8-1.0 MPA
Available Fuel:Natural gas, coke oven gas, bio-gas,liquefied petroleum gas, diesel, heavy oil, light oil, crude oil
Available Industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

 

YQ(Y)W Series Horizontal LPG Fired Thermal Oil Boiler Introduction

1400 kw 2 ton horizontal LPG fired thermal oil boiler have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.

This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

 

1400 kw 2 ton Horizontal LPG Fired Thermal Oil Boiler Advantages

Digitized manufacture

  1. The laying-off of steel tube adopts CNC 3D laser cutting machine.
  2. The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .

 

Full argon arc welding

The YQ(Y)W series thermal fuid heater tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .

 

Easy operation

  1. Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  2. Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  3. The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.

 

Less fuel consumption

  1. Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  2. Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  3. Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.

 

Safely operation

  1. The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  2. Conical coil effectively protects the furnace wall at the end of heater and burner on the top.

 

YQ(Y)W Series Thermal Fluid Heater Specification

Model Rated thermal power    (KW) Rated thermal power    (x104kcal/h) Design working temperature(≤℃) Rated working pressure(MPa) Thermal efficiency (≥%) System installation power(KW) Maximum transport size(m)
(L×W×H)
YQW-1400 Y(Q) 1400 120 320 0.8 95 35 4.3×2.0×2.6
YQW-1800 Y(Q) 1800 160 320 0.8 95 56 4.9×2.2×2.6
YQW-2400 Y(Q) 2400 200 320 0.8 95 56 5.3×2.5×3.0
YQW-2800 Y(Q) 2800 240 320 0.8 95 66 6.1×2.5×3.0
YQW-3500 Y(Q) 3500 300 320 0.8 95 75 6.7×2.6×3.0
YQW-4200Q 4200 360 320 0.8 95 95 6.9×2.7×3.2
YQW-4600Q 4600 400 320 0.8 95 95 7.0×2.9×3.4
YQW-6000Q 6000 500 320 0.8 95 140 7.2×3.3×3.9
YQW-7000Q 7000 600 320 0.8 95 140 8.0×3.6×4.0
YQW-8200Q 8200 700 320 0.8 95 140 8.5×3.7×4.0
YQW-9400Q 9400 800 320 1 95 200 9.5×3.8×4.0
YQW-10500Q 10500 900 320 1 95 200 10.5×3.8×4.0
YQW-12000Q 12000 1000 320 1 95 240 12.4×3.8×4.0
YQW-14000Q 14000 1200 320 1 95 300 13.5.×4.0×4.2


Leave a Reply

Name *
Country
Email *
Tel
Boiler type:
Fuel:
Pressure :
Message:

Related Cases

2 Ton Oil Fired Steam Boiler for Textile Industry in Eswatini

Application Industry: Textile Industry Project supporting boiler: WNS2-1.25-Y Project boiler med...

3.6 Million Kcal YLW Series Chain Grate Thermal Oil Heater

Case name: 3.6 Million Kcal YLW Series Chain Grate Thermal Oil Heater Project Company Profile: I...

French Customers Vsit The Zozen Boilers Plant

As is known to all, industrial boilers now occupy an important position in our production and lif...

ZOZEN’s Water Tube Boilers are Exported to Australia

A few days ago, after a friendly meeting between the management personnel of both parties, Wuxi Z...

15 TPH Tri-Drum Biomass Steam Boiler in Building Material Industry

Application Industry: Building Material Industry Project supporting boiler: DZL15-1.6-SCIII Proj...

Gas Company Visited ZOZEN’S Enterprise For Field Visit

On June 22, due to the transformation needs of the gas company, the company came to ZOZEN’S...

Latest News

8 Ton Coal Fired Chain Grate Boiler

8 Ton coal-fired boiler uses the corresponding front and rear arch, the combustion condition is g...

Efficient and Environmentally Friendly: Biomass Fired Thermal Oil Heater

Introduction In the realm of industrial boilers, biomass fired thermal oil heaters have gained si...

WNS8-1.25-YQ Horizontal Natural Gas 8 Tons Steam Boiler

WNS8-1.25-Y(Q) boiler is a horizontal wet-back three-pass gas boiler. The main pressure component...

Fire Tube Wet Back Steam Boiler Manufacturer

After the heat transfer of the flue gas of the fire tube steam boiler through the smoke chamber i...

High Quality Coal Boilers in Indonesia

DHL series coal – fired boilers adopt membrane water – wall structure, the furnace, s...

Vertical Natural Gas Thermal Oil Boiler Supplier

Gas thermal oil boiler has the characteristics of low pressure and high temperature operation, an...